NewAir AC-10000E Owner's Manual page 8

Control Panel
1. ON/OFF (power) button
2. Timer button
3. Timer indicator light
4. Temperature increase button
5. Compressor indicator light
6. Full water tank indicator light
7. Temperature decrease button
8. Low ventilation indicator light
9. High ventilation indicator light
10. Heating mode indicator light (only for
AC-10000H)
11. Fan mode indicator light
12. Cooling mode indicator light
13. Automatic mode indicator light
14. Mode selection button
15. Fan speed (ventilation) button
16. Display window
17. Remote control receiver
FIG.14
Turning the Unit On and Off
1. Press the ON/OFF button.
,
,
The unit will start automatically. If the ambient temperature is:
Higher than 74°F, the unit will operate in cooling mode.
Higher than 68°F but below or equal to 74°F, the unit will operate in fan mode.
Equal to or below 68°F, the unit will operate in heating mode (heating mode is only
available on model # AC-10000H).
The indicator lights showing any functions will turn on. Please note that the display window
will only show ambient room temperatures ranging from 32°F to 122°F.
To turn the unit off, press the ON/OFF button again.
Setting the Mode/Function
1. Press the MODE button to select the desired mode (cooling, heating, fan or automatic).
2. The selected mode's indicator light will turn on.