NewAir AC-10000E Owner's Manual page 12

Hide thumbs Also See for AC-10000E:

Thedrainage hosemaybeextended by

adding anextension hoseusinga suitable

connector.

FIG.19

PLEASE

NOTE:

The drain must be at or below the level

of the drainage port.

The full water tank indicator light will not

work when the unit is being

continuously drained.

To extend the drainage hose, you can

connect it with another hose with an

overall diameter of 0.7" (18 mm).

If room humidity levels are over 85%, it

will be necessary to continuously drain

the unit using the drainage hose.

Drainage hose

included with the unit

FIG.20

Drainage hose

ipcluded with the unit

Extension hose (OD: 0.7")

For

Heating Mode (only

for model no. AC-10000H)

While using the heating function, please note the following:

In order to properly exhaust cool air, make sure the exhaust hose and window kit are

properly installed (refer to page 4 for instructions).

Set up the air conditioner for continuous drainage using the drain tube (refer to page 10 &

11 for instructions).

The unit may not provide optimal

The working range for the heating function is 32 ° F to 68°R

heating if used in temperatures outside this range

Ac-10000h