D15 Interactive Status; Figure 30 - Interactive Status Front Panel Display - Motorola QIP7000 (P2) Series Installation Manual

Diagnostics

d15 Interactive Status

This diagnostic describes the interactive information that is displayed only when Thin
Client platform is running. The information on the OSD and front panel is updated at least
once every 5 seconds while the diagnostic is displayed. This is an example of a code
module display with status descriptions:
The Interactive Status fields are:
Field
IP Address
Downstream ID
State
QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual
574702-001 a
Figure 30 – Interactive status front panel display
Description
The IP address in dotted-decimal format xxx.xxx.xxx.xxx assigned by the NC
1500 to the QIP7000 series. 0.0.0.0 is displayed if the IP address is not
configured or unknown.
A four-digit decimal value from 0000 to 9999 assigned by the DAC 6000 to the
QIP7000 series. 0000 is displayed if the Downstream ID is not configured or if
it is unknown.
The interactive status of the QIP7000 series:
Front OSD
panel
U UNCONFIG
C MAC_CONNECT
This document is uncontrolled pending incorporation in a Motorola CMS
Description
The QIP7000 series is not configured for
the interactive system, and the platform
should run as pre-interactive.
The QIP7000 series is waiting to establish
B
68