Audio Connection Options; Clearing The Hard Drive - Motorola QIP7000 (P2) Series Installation Manual

Installation

Audio Connection Options

When connecting to a home theater receiver, depending on its inputs, you can use the
following QIP7000 series audio outputs:
Connection Type
Digital audio optical
(S/PDIF) or digital
audio coaxial (RCA)
Baseband
Audio L and R
Connect the stereo audio cable to the
and the audio left and right connectors on the TV. If the equipment supports it, use the
optical S/PDIF
cases, these outputs offer better audio quality, including support for 5.1 Surround Sound.
The cabling diagrams show sample audio/video (A/V) connections to an audio receiver,
where the receiver functions as an A/V router.
When connecting to an audio receiver, reference its installation instructions for directions
on connecting to baseband and digital (S/PDIF) audio ports.
Note: The VCR and TV receive their A/V signals from the currently selected input device
on the audio receiver. This is important when the subscriber has another A/V device such
as a DVD player, a secondary VCR, a CD player, or other electronic component. We
recommend connecting the TV to the monitor output so on-screen menus for the
receiver can be displayed. (In many cases, the receivers themselves have interactive
on-screen menus.)

Clearing the Hard Drive

On a previously-used cable terminal, delete all recorded programs from the hard drive
before installing it at a new subscriber location. This prevents your new subscriber from
viewing programming they may not have purchased or may not want to see.
To prevent subscribers from accidentally deleting all of their recorded programs, a
specific set of keystrokes is required to clear the hard drive. Having a TV connected is
optional.
To clear the hard drive:
1. Start the diagnostics as described in the
front-panel display.
2. Using a remote control, within five seconds, press
LIVE TV . On some remote controls, the
3. If you correctly enter this key sequence in five seconds or less, the hard drive is
cleared and the front-panel displays Clr.
4. If Clr is not displayed, re-enter the key sequence in step 2.
QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual
574702-001 a
Description
If the receiver supports it, use the digital audio optical (S/PDIF) or digital
audio coaxial (RCA) audio output to deliver Dolby Digital audio to a Dolby
Digital home theater receiver.
Audio is available via HDMI and IEEE-1394 and no further audio connection
is required. For RF output, no further audio connection is required.
If the audio receiver does not support Dolby Digital, use the baseband
AUDIO L and R outputs to connect to the audio receiver.
or coaxial digital RCA output instead of the
This document is uncontrolled pending incorporation in a Motorola CMS
AUDIO L and R connectors on the QIP7000 series
AUDIO L
section; d01 is displayed on the
Diagnostics
REPLAY
MY DVR key may be labeled
and R outputs. In most
MY DVR
, three times, and
LIST .
B
17