Connecting To The Ont With Embedded Moca; Figure 13 - Connecting To The Ont1000M - Motorola QIP7000 (P2) Series Installation Manual

Installation

Connecting to the ONT with embedded MoCA

If necessary, connect to the ONT to the home coaxial network. This example shows
connecting the Motorola ONT1000M with embedded Multimedia over Coax Alliance
(MoCA) technology.
CAUTION Be sure the coaxial cabling on the customer premises is not connected to any digital
network or satellite dish.
Determine how to route the coaxial and Ethernet cables from the ONT into the home.
You may need to move an existing cable drop from its present location to where the
ONT is mounted.
To connect to the Motorola ONT1000M:
•
Open its door.
•
Connect the customer's premises coaxial cable wiring to the
•
If necessary, route the coaxial cables into the house.
•
Replace the lower half enclosure and secure the ONT1000M.
QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual
574702-001 a
Figure 13 – Connecting to the ONT1000M
This document is uncontrolled pending incorporation in a Motorola CMS
B
port.
CABLE OUT
19