Drobo 5N Manual page 31

8. Protect from Heat: Drobo, DroboPro, DroboElite, Drobo FS, Pro FS, B800i, B800fs, B1200i,
Drobo 5D, Drobo 5N, and Drobo Mini should be situated away from heat sources such as
radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
9. Protect Power Cords: Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying particular attention to
cords and plugs, convenience receptacles, and the point at which they exit from the product.
10. Avoid Object and Liquid Entry: Never push objects of any kind into Drobo, DroboPro,
DroboElite, Drobo FS, Pro FS, B800i, B800fs, B1200i, Drobo 5D, Drobo 5N, and Drobo Mini
ventilation slots except drives compliant with the User Guide as they may touch dangerous
voltage points or short the parts, resulting in the risk of fire or electric shock. Never spill liquid
of any kind onto Drobo.
11. TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF ELECTRICAL PLUG TO
WIDE SLOT AND INSERT FULLY.
12. DROBO, DROBOPRO, DROBOELITE, PRO FS, B800i, B800fs, B1200i, Drobo 5D, Drobo
5N, AND Drobo Mini CONTAIN A LITHIUM BATTERY WHICH CAN EXPLODE IF
MISHANDLED. BATTERY IS NOT FIELD OR USER-SERVICEABLE. Please dispose of
battery in a manner consistent with local jurisdictions.
13. DRIVES IN DROBO, DROBOPRO, DROBOELITE, DROBO FS, PRO FS, B800i, B800fs
AND B1200i WILL RETAIN HEAT AFTER USE. PLEASE USE CAUTION WHEN
REMOVING DRIVES FROM DROBO, DROBOPRO,DROBOELITE, DroboFS, ProFS, B800i,
B800fs, B1200i, Drobo 5D, Drobo 5N, OR Drobo Mini. TO SAFELY REMOVE DRIVES,
PRESS THE DRIVE LATCH TO RELEASE THE DRIVE AND ALLOW THE DRIVE TO
COOL IN THE DATA BAY FOR 10 MINUTES BEFORE COMPLETELY REMOVING THE
DRIVE FROM DROBO, DROBOPRO,DROBOELITE, DroboFS, ProFS, B800i, B800fs OR
B1200i. FAILURE TO FOLLOW THIS PROCEDURE MAY RESULT IN INJURY FROM HOT
DRIVES.
14. Damage Requiring Service: Drobo, DroboPro, DroboElite, Drobo FS, Pro FS, B800i, B800fs,
B1200i, Drobo 5D, Drobo 5N, and Drobo Mini should be serviced by an employee of Drobo,
Inc. or a Drobo, Inc. Authorized Reseller ("qualified service personnel"), and should be
serviced when:
A THE POWER SUPPLY CORD OR PLUG IS DAMAGED OR FRAYED;
B LIQUID HAS SPILLED INTO DROBO, DROBOPRO, DROBOELITE, DROBO FS, PRO FS, B800i, B800fs, B1200i, Drobo 5D, Drobo
5N, OR Drobo Mini;
C DROBO, DROBOPRO, DROBOELITE, DROBO FS, PRO FS, B800i, B800fs, B1200i, Drobo 5D, Drobo 5N, OR Drobo Mini HAS
BEEN EXPOSED TO RAIN OR WATER;
D DROBO, DROBOPRO, DROBOELITE, DROBO FS, PRO FS, B800i, B800fs, B1200i, Drobo 5D, Drobo 5N, OR Drobo Mini DOES
NOT OPERATE NORMALLY WHEN YOU FOLLOW THE OPERATING INSTRUCTIONS;
E DROBO, DROBOPRO, DROBOELITE, DROBO FS, PRO FS, B800i, B800fs, B1200i, Drobo 5D, Drobo 5N, OR Drobo Mini HAS
BEEN DROPPED OR THE CHASSIS DAMAGED;
F DROBO,DROBOPRO, DROBOELITE, DROBO FS, PRO FS, B800i, B800fs, B1200i, Drobo 5D, Drobo 5N, OR Drobo Mini EXHIBITS
A DISTINCT CHANGE IN PERFORMANCE.
15. Use only the supplied USB 2.0, USB3.0, FireWire 800, Ethernet, and power cables when
operating Drobo, DroboPro, DroboElite, Drobo FS, ProFS, B800i, B800fs, B1200i, Drobo 5D,
Drobo 5N, or Drobo Mini.
Servicing – The user should not attempt to service Drobo, DroboPro, DroboElite, Drobo FS, Pro
FS, B800i, B800fs, B1200i, Drobo 5D, Drobo 5N, or Drobo Mini beyond that described as user
service items in the FAQ section of this manual, the Troubleshooting sections of the Help Files, or
the support Knowledge Base. All other servicing should be referred to qualified service personnel.
Drobo 5N Getting Started Guide 31