Download  Print this page

NEC MultiSync P403 User Manual page 42

Display monitor
Hide thumbs

Advertisement

AMX Setting
Click "AMX" on the left side of HOME.
AMX BEACON
Turn on or off for detection from AMX Device Discovery when connecting to the network supported by
AMX's NetLinx control system.
TIP:
When using a device that supports AMX Device Discovery, all AMX NetLinx control system will
recognize the device and download the appropriate Device Discovery Module from an AMX server.
Placing a checkmark will enable detecting the projector from AMX Device Discovery.
Clearing a checkmark will disable detecting the projector from AMX Device Discovery.
CRESTRON Setting
Click "CRESTRON" on the left side of HOME.
CRESTRON ROOMVIEW compatibility
The monitor supports CRESTRON ROOMVIEW, allowing multiple devices connected in the network to be managed and
controlled from a computer or a controller.
For more information, visit http://www.crestron.com
ROOMVIEW
ROOMVIEW for managing from the computer.
ON: Enables ROOMVIEW.
OFF: Disables ROOMVIEW.
CRESTRON
CRESTRON CONTROL for managing from the controller.
CONTROL
ON: Enables CRESTRON CONTROL.
OFF: Disables CRESTRON CONTROL.
CONTROLLER IP
Set your IP address of CRESTRON SERVER.
ADDRESS
IP ID
Set your IP ID of CRESTRON SERVER.
TIP: The CRESTRON settings are required only for use with CRESTRON ROOMVIEW.
For more information, visit
http://www.crestron.com
English-40

Advertisement

loading

  Also See for NEC MultiSync P403

  Related Manuals for NEC MultiSync P403