Download  Print this page

Controlling The Lcd Monitor Via Rs-232C Remote Control - NEC MultiSync P403 User Manual

Display monitor
Hide thumbs

Advertisement

Controlling the LCD monitor via RS-232C Remote Control

This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal.
Functions that can be controlled by a personal computer are:
Power ON or OFF.
Switching between input signals.
Sound Mute ON or OFF.
Connection
LCD Monitor + PC
PC
NOTE:
If your PC is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter is required. Contact your
dealer for details.
For the pin assignment, please see page 49 "2) RS-232C input/output".
To control a monitor, please use the control command. Instructions for the control command can be found on the CD included
with the display. The fi le is called "External_control.pdf".
1) Interface
PROTOCOL
RS-232C
BAUD RATE
9600 [bps]
DATA LENGTH
8 [bits]
PARITY BIT
NONE
STOP BIT
1 [bit]
FLOW CONTROL
NONE
This LCD monitor uses RXD, TXD and GND lines for RS-232C control.
The reverse type cable (null modem cable) (not include) should be used for RS-232C control.
RS-232C Cable
English-32
MultiSync
RS-232C

Advertisement

Table of Contents
loading

  Also See for NEC MultiSync P403

  Related Manuals for NEC MultiSync P403