Postscript Feature List - Xerox WorkCentre 7120 Reference Manual

PostScript Feature List

Feature
Copies
Collation
Duplex
Tumble
Media Class
Media Color
Media Direction
Media Selection
Media Size
Media Source
Media Source from Bypass tray
Media Weight
Output Location
Image Enhancement
Toner Save
Halftone Screen Selection
Offset
Booklet
Punch
Stapling
Print Mode
Process Color Model
RGB Correction
Gray Guaranteed
Gamma Correction
CMYK Correction
White Point
RGB Space
Brightness
Separations
Separation Color Names
Separation Order
Use CIE Color
Job Name
Job Type
(Secure Print / Proof Print / Box
Print)
Job Based Accounting
Auditron
Delay Print
Banner Sheet
dc10cc0471
Customer Support
The number of copies to produce, either of each page individually or of the document
as a whole, depending on the value of the Collation parameter.
A flag specifying how the output is to be organized when multiple copies are requested
for a multiple-page document.
Delivers two-sided output.
Deliver two-sided output. Use combined with Duplex.
Paper class (ex. normal, thick, recycled)
Use this command to indicate the color of the media used to print.
This command specifies the edge of the input medium that will enter the imager first
and across which data will be imaged. Values reflect positions relative to a canonical
page in portrait orientation (width smaller than height).
Specify if you apply the strict setpagedevice rule to media selection.
This command specifies the size of media on which to print.
This command specifies the tray to supply the job's media.
This command indicates whether the input medium is to be fed from bypass tray.
Media weight. Unit: (g/ ) gram per square-meter
Indicates the output bin where the print job is sent.
Specify whether you apply edge-smoothing to output after rendering
Use this command to control toner consumption when printing.
This command specifies the screen type.
This feature provides a physical offset of hard copy that distinguishes between sets or
stacks within a job.
This command enables you to print documents as small booklets.
This command indicates hole punches for a print job on a device with hole punch
capability.
This command indicates use and location of staple(s).
This command sets the resolution and the color depth value.
Select process color model (DeviceGray, DeviceRGB, DeviceCMYK,,,)
Specify whether you apply RGB correction to the color conversion process
Specify whether to convert RGB black (R=G=B) to pure black for text and graphics
objects.
Specify gamma value for RGB color conversion
Specify whether you apply CMYK correction to the color conversion process
Specify White Point of Client side
Specify RGB Space for RGB correction
Specify brightness of output color
Specify whether multiple color separations are generated for each page of output.
Specify the process colorant name.
Specify the order of process colorant name.
Specify if you apply CIE-based color space through color conversion
These commands are the same as the 'PCL/PJL Implementation'. Please refer the
PCL/PJL section.
Description
Page 18