Pcl Feature List; Pcl/Pjl Implementation; Job Name; Job Mode - Xerox WorkCentre 7120 Reference Manual

PCL Feature List

Feature

Job Name

Job Mode

Banner Sheet (Start Sheet)
Copies
Quantity
Simplex / Duplex Printing
Orientation
Job Type
Delay Print
Media Source
Custom Media Size
Output Location
Stapling
Punch
Folding
Booklet
Resolution
Bits Per Pixel
Force Short Edge Feeding
Job Based Accounting /
Auditron

PCL/PJL Implementation

This section describes the PCL commands for specific features. This table lists each feature and the PCL syntax that is required to
use the feature. Following this table are examples of how to use these commands and what the PCL file looks like.
JOB NAME
PJL
＠PJL SET JOBNAME = "jobname-string"
Where jobname-string is a maximum of 32 characters
JOB MODE
PJL
@PJL JOB MODE = value
Where value is one of the following:
PRINTER = Printer
dc10cc0466
Customer Support
Job Name
Specify Job Mode
Turns on/off the banner sheet that prints at the beginning of every job.
Specifies the number of uncollated sets of a document in a print job.
Specifies the number of collated sets of a document.
Deliver one-sided or two-sided output
Landscape or Portrait
You can specify Confidential Print or Proof Print
Delays printing a job until the time specified by the command.
Specifies the tray to supply the job's media.
Specifies the designated media size.
Indicates the output bin where the print job is sent.
Indicates use and location of staple(s).
Indicates hole punches for a print job on a device with hole punch capability.
Indicates to fold the print job.
Enable printing documents as small booklets. The pages are reordered sequentially and
are oriented so that when they are folded, the paging is correct.
Sets the resolution value.
Sets the color depth value.
Indicates the feed edge to use.
Allows entry of accounting information.
Description
Page 5