Master Chef Ovens
5.25
Operational Temperature Sensor (1R30 & 4R30)
– Removal
Refer to: Top Heater/Broiler Heating Element – Removal (Section 5.22)
5.26
Self Clean Temperature Sensor (3R30 & 6R30)
– Removal (P/Self Clean Models)
1.
Remove the Front Doors (Section 5.2).
2.
Remove the oven (Section 5.5).
3.
Remove the Back Panel(s) – as necessary (Section 5.9 and /or 5.10)
4.
Disconnect the electrical connection.
5.
Refer to Figure 5-19. Move the retaining spring to the side and
remove the Sensor (Item 1) from the Catalyst Vapor Outlet .
1.
2.
Figure 5-19: Self Clean Temperature Sensor Removal
Self Clean Temperature Sensor
Catalyst Vapor Outlet
51
Technical Information