Miele H394B Technical Information page 42

Technical Information
5.4 Halogen Light Bulb – Replacement (Continued)
4.
5.
6.
7.
8.
9.
Carefully pry the light cover out of the metal frame
(Figure 5-3).
Slide the light cover out.
Figure 5-4: Sliding light cover from the clamps
Note
Do not bend the metal clamps. Bending the clamps could
damage the clamps and reflector.
Replace the halogen bulb.
Note
Only use a 12 V, 10 W, 572°F (300°C) heat resistant,
Osram, type w818 bulb.
Do not touch the new light bulb with your fingers; touching
the bulb will reduce its life.
Put the light cover back in place with the notch to the rear of the
metal clamps.
Press the light cover in to the metal frame.
Re-Install the runners.
34
Master Chef Ovens