Self-Cleaning; Lint Filter - Kenmore Three-speed automatic washers Owner's Manual And Installation Instructions

2ND RINSE
A second rinse removes excess
detergent residue,
STEP 1, Set the WATER LEVEL Control.
STEP 2. Set the WATER TEMPERA-
TURE Control.
STEP 3. Set the Cycle Selector Control
(Timer) to 2ND RINSE.
STEP 4. Pull the Timer knob out to start
the washer.
RINSE AND SPIN
When using extra detergent for heavily
soiled clothes, or washing special_care
items, you may find an extra rinse and
spin is needed.
STEP 1. Set WATER LEVEL Control.
STEP 2. Set WATER TEMPERATURE
Control.
STEP 3. Set the Cycle Selector Control
(Timer) knob to a RINSE setting.
STEP 4. Pull the Timer knob out to start
the washer.
SPIN ONLY
A drain and spin may help shorten drying
times for some heaw fabrics or special-
care items by removing excess water.
STEP 1. Set the Cycle Selector Control
(Timer) knob to a SPIN setting.
STEP 2. Pull the Cycle Selector Control
(Timer) knob out to start washer.
SELF-CLEANING LINT FILTER
Wt'J"'I'J_i :I:4 i[_ i'll
Lint is filtered from the load
automatically - there's no
messy cleanup.
Your washer features a self-cleaning
filter that traps lint from the water while
the washer is washing and deep rinsing
the laundry. The trapped lint is flushed
down the drain automatically. You don't
have to clean the filter.
26