Download  Print this page

Electrical Requirements - KENMORE 580.72187200 Owner's Manual

Heat/cool air conditioner.
Hide thumbs

Advertisement

Table of Contents
OBSERVE ALL LOCAL CODES AND
ORDINANCES.
DO NOT, UNDER ANY CIRCUMSTANCES,
REMOVETHEPOWERSUPPLYCORD
GROUND PRONG.
ELECTRICAL GROUNDIS
REQUIRED ON
THIS APPLIANCE.
A 250-volt 60 Hz, AC only, 20A fused and
properly grounded electrical supply is required.
A time delay fuse or time delay circuit breaker
is recommended. Use a dedicated circuit,
serving only this appliance.
DO NOT USE AN EXTENSION CORD.
RECOMMENDED
GROUNDING METHOD
For your personal safety, this appliance must
be grounded. This appliance has a power
supply cord with a 3÷prong grounding plug. To
minimize possible shock hazard, the cord must
be plugged into a mating grounding type wall
receptacle and grounded in accordance with
the National Electrical Code (ANSI/NFPA 70)
latest edition and all local codes and
ordinances. If a mating wall receptacle is not
available, it is the personal responsibility and
obligation of the customer to have a properly
grounded 3-prong wall receptacle installed by a
qualified electrician.
_WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result
in death, fire, or electrical shock.
Line Cord Plug
J
I_ _ _
/
DO not, under any
__/_
circumstances,
cut or
_
remove the grounding prong
from the plug.
I
Power supply cord with
3-prong grounding
plug
Use Wall Receptacle
Power Supply
Standard
250V,
3-wire grounding
receptacle
rated
20A, 250V AC
Use 20 AMP,
time delay fuse
or circuit
breaker.
-4-

Advertisement

Chapters

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: