Table of Contents
Advertisement
STAND KIT CLEARANCES
12"
Dryer
___
12"
Wa
23'_16"
_'1"_
281/4"_
FrontView
SideView
StackStand
StackStand
(DoorNotShown)
(DoorShown)
***48+sq+ in_+. D
-
minimum
ventilation
area
***24sq,in_+
minimum
__
ventilation
al_a
FrontView
(DoorWith Vent)
J
3"
3"
* 1" dimensionmustbe from frontof timerknob.
** Additional clearances for wall, door and lloor moldings may be required.
*** Opening is minimunl
for closet door. Lot=vered door with equivalent air openings
is acceptable.
• The installation spacing is in inches and
• For complete installation information,
is the minimum allowable,
order Stand Kit Installation Instructions+
• If installing your portable dryer on a
Part No. 49971/8, from your Sears store
stand kit, do not install the casters,
or Sears Service Center.
MOBILE HOME EXHAUST
REQUIREMENTS
• The dryer must not be installed where
it will be exposed to water and/or weath-
er. Proper operation of dryer cycles
requires temperatures above 45°R At
lower temperatures, the dryer may not
shut off at the end of automatic cycles
and drying times will be extended.
This dryer is suitable for mobile home
installations. The installation must
conform to the Manufactured Home
Construction and Safety Standard,
Title 24 CFR, Part 3280 (formerly the
Federal Standard for Mobile Homes Con-
struction and Safety, Title 24,
HUD Part 280).
• Dryer exhaust vent must not be
connected or secured with screws
or other devices which extend into
the interior of the vent.
• The exhaust vent must be securely
fastened to a non-cembustible
portion of the mo-
bile home struc-
ture and must not
terminate
k_
beneath the
mobile home.
• While in transit,
it is recommend-
ed that you
secure the
portable
dryer to the floor.
Mobile Home
Installation Kit
346764 is available from your Sears
store or Sears Service Center. This kit
includes the necessary fastening hard-
ware and detailed installation
instructions.
10
Hide quick links:
Advertisement
Table of Contents
