Table of Contents
Advertisement
REVIEW INSTALLATION
Take a few minutes to complete
this checklist. It will help assure you
that you have a proper installation
and increase your satisfaction with
your Kenmore dryer.
I Check that all parts you removed
from the parts packages are now
installed.
I
If using an exhaust system, ensure
that dryer is positioned in its final
location before operating. Make sure
vent is not crushed or kinked.
I
Check to make sure you have all
the tools you started with.
FINAL STEPS
I Plug the power supply cord into the
grounded outlet.
I Wipe the interior of the drum
thoroughly with a damp cloth to
remove any dust.
[
Read the rest of this manual to fully
understand your new dryer. Start the
dryer and allow it to complete a full
heat cycle (not the air cycle). After five
minutes, open dryer door. You should
feel heat inside the dryer. If you do
not feel heat, see Troubleshooting
information on pages 26-27,
NOTE: You may notice a burning
odor, This smell is common when
the heating element is first used.
The smell will go away.
17
Hide quick links:
Advertisement
Table of Contents
