Display Assembly; Removing The Display Assembly - Dell XPS M1210 Service Manual

Back to Contents Page
Display
Dell™ XPS™ M1210 Service Manual
Display Assembly
Display Bezel
Display Panel
Display-Panel Brackets
Display Assembly

Removing the Display Assembly

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, remove the main battery (see
computer.
1. Follow the instructions in Before Working Inside Your
2. Turn the computer upside down and loosen the captive screw on the communications card cover.
NOTE: You must detach the Mini-Card (WLAN and/or Mobile Broadband) antenna cables (see
Mini-Card is installed, disconnect the antenna cables from the card(s). If one is not installed, detach the antenna cables from their secured location.
3. Disconnect the antenna cables from the Mini-Card(s), if applicable.
4. Turn the computer top-side up.
5. Remove the hinge cover (see
6. Remove the keyboard (see Keyboard).
Computer.
Removing the Hinge Cover).
Before Working Inside Your Computer) before working inside the
step 3) before you can remove the display assembly. If a