Dell XPS M1210 Service Manual page 24

Back to Contents Page
Fan
Dell™ XPS™ M1210 Service Manual
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, remove the main battery (see
computer.
1. Follow the instructions in Before Working Inside Your
2. Remove the hinge cover (see
3. Remove the keyboard (see Keyboard).
4. Remove the display assembly (see
5. Remove the palm rest (see
6. Remove the M2.5 x 8-mm screw from the fan, and then disconnect the fan cable from the system board.
7. Lift the fan out of the computer.
1 M2.5 x 8-mm screw
2 fan
Back to Contents Page
Computer.
Removing the Hinge Cover).
Removing the Display Assembly).
Removing the Palm Rest).
3 fan cable
4 connector on system board
Before Working Inside Your Computer) before working inside the