Table of Contents
Advertisement
7. Adhere the tape that secures the I/O-board cable connector to the I/O board.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
About this task
The following image indicates the location of the display assembly and provides a visual representation of the removal procedure.
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
39
Advertisement
Table of Contents
