Auxiliary Input - Jensen JIMS-260I User Manual

Wall mountable docking music system with cd for ipod and iphone
Table of Contents

Advertisement

5).
Press the TIMER button to confirm, wake up
button to select a source you want to wake
6). Press the TIMER button to confirm, Press the
wake volume level.
7). Press TIMER button to confirm,
Note: When "Wake to Radio" is selected, make sure the radio station you want to
wake to is tuned.
/ iPhone is not docked or CD is not loaded, the alarm source will be
redirected to the radio automatically when the wake time is reached.
8.) If you want to switch off the wake timer, tap the
icon disappears from the display.
9.)
When the wake time is reached, the selected source, radio, CD or iPod/iPhone
will begin to play. The wake timer continues to sound for 60 minutes if no
button is pressed and the unit will reset itself for the following day.
10.) To stop the wake timer after the preset time is reached and the source begins
to play, press either the
PRESET EQ (REMOTE CONTROL ONLY)
This unit provides 4 different EQ modes to enhance your listening experience.
You can select the desired effect by pressing the "EQ" button on remote control
repeatedly at following sequence:
Off
- Press the MUTE button on remote control to mute the sound output from
speaker temporarily, MUTE icon will appear on display and flashing.
- Press the MUTE button again to resume to normal speaker playback.
This unit provides an auxiliary audio signal input jack for connecting external
audio devices like MP3 players, CD players and older, non-dockable iPods
(except iPod shuffle 3
speakers of this system.
1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of
the cable.
2. Plug one end into the Aux-in jack on the main unit and the other end of the
cable into the Line-out Jack or Headphone Jack of your external audio device.
3. Turn on the external audio device.
If "Wake to iPod" or "Wake to CD" is selected but an iPod
POWER button
ROCK
CLASSIC
Mute Button (By Remote Control)

AUXILIARY INPUT

rd
gen) and listen to your external source through the
16
source
flashing. Press the
to.
or
buttons to set the
button and the
TIMER
or the
TIMER button once.
JAZZ
or
TIMER
POP

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents