Epson TM-U950P - B/W Dot-matrix Printer Specification page 8

REV. SHEET
F 4 1.5 Auto Cutter
Full cut/partial cut: ... ® Partial cut: ...
17-5 2.1.4 Reception of status from the printer through the bidirectional
parallel interface
First Status in Example
19 2.2.3 Drawer kick-out connector (modular connector)
The host ... DLE EOT, ESC u, GS r or GS a (ASB) commands... ®
The host ... DLE EOT, ESC u, GS ENQ, GS r, or GS a (ASB)
commands ...
22 3.1 Command List
FF
CR
DLE EOT :Transmit real-time status ®
ESC -
ESC 2
ESC =
ESC E
ESC G
ESC U
ESC c 0 :Select print paper(s) ® Paper type(s) for printing
23
ESC c 1 :Select paper(s) for setting ®
ESC c 3 :Select paper sensor(s) to output paper and signals ®
ESC d
ESC f
ESC i
ESC m
TITLE
REVISION SHEET
CHANGED CONTENTS
:Print and eject slip paper ® Print and eject cut sheet
:Carrige return ® Print and carrige return
Real-time transmission of status
:Turn on/off underline mode ® Turn underline mode on/off
:Select 1/6-inch line spacing ® Select default line spacing
:Set slip paper eject lengh ® Set cut sheet eject lengh
:Turn on/off emphasized mode ®
Turn emphasized mode on/off
:Turn on/off double-strike mode ®
Turn double-strike mode on/off
:Turn on/off unidirectional printing mode ®
Turn unidirectional printing mode on/off
Paper type(s) for command settings
Select paper sensor(s) to output paper end signals
:Print and feed paper n lines ® Print and feed n lines
:Set slip paper waiting time ® Set cut sheet wait time
:Execute full cut ® Partial cut (one portion left uncut)
:Execute partial cut ® Partial cut (three portions left uncut)
TM-U950/U950P
Specification
(STANDARD)
Sheet 7 of 10
DATE
[Correction]
[Correction]
[Addition]
[Correction]
[Correction]