Epson TM-U950P - B/W Dot-matrix Printer Specification page 23

Ä Copy capability and paper thickness:
ùNormal paper (single-ply):
ùCarbon copy paper combination:
Backing paper:
Copy and original:
Carbon paper:
Total thickness:
ùPressure sensitive paper:
Backing paper:
Copy and original:
Total thickness:
NOTE: When using multi-ply paper that consists of an original and three copies, be sure to print with a
9 ´ 9 font. If a 7 ´ 9 font is used, some characters on some of the copies may not be
readable.
c) Check paper (only when the printer is used with the MICR reader)
À Paper type:
Á Total thickness:
 Size:
à Weight:
5) Notes on setting the print operation mode
ù The GS E command sets print mode (printing speed and print head energizing time).
ù When the power is turned on, normal mode is selected as the default. The printer automatically
switches from normal mode to copy mode when slip is selected by ESC c 0.
ù Refer to ESC c 0 and GS E.
6) Notes on slip paper
ù The slip paper must be flat, without curls or wrinkles, especially at the top edges. Otherwise, the
paper may rub against the ribbon and become dirty.
ù There must be no glue on the bottom edge of slip paper. It is desirable for the glue to be on the top
edge. Choose slip paper carefully when the glue is on the right or left edge, since paper feeding
and insertion are affected by gluing conditions (e.g., glue quality, method, and length) and glue
location (refer to Figure 1.8.1). Be especially careful when slip paper is wide and has the glue on
the right or left edge, since skew may occur.
ù Since the slip insertion sensor uses a photo sensor, do not use paper that has holes at the sensor
position, or is translucent (refer to Figure 1.8.2).
EPSON
0.09 to 0.2 mm (.0035 to .0079")
5 sheets maximum
(original + 4 copies, at 20° to 40°C (68° to 104°F))
0.06 to 0.15 mm (.0023 to .0059")
0.04 to 0.07 mm (.0015 to 0028")
Approximately 0.035 mm (.0014")
0.30 mm (.0118") or less
(for any combination from a single original to an original + 3 copies)
0.36 mm (.0141") or less
(for any combination from a single original to an original + 4 copies)
5 sheets maximum
(original + 4 copies, at 20° to 40°C (68° to 104°F))
0.06 to 0.15 mm (.0023 to .0059")
0.06 to 0.075 mm (.0023 to .003")
0.24 mm (.0094") or less (original to original + 3 copies)
0.30 mm (.0118") or less (original + 4 copies)
Normal paper
0.09 to 0.2 mm (.0035 to .0079")
68 to 102 mm ´ 152 to 210 mm (2.68 to 4.02" ´ 2.98 to 8.27")
70 to 90 kg paper
TITLE
TM-U950/U950P
Specification
(STANDARD)
SHEET NO.
REVISION
NEXT
B
A
6-1 7
SHEET
6