Epson TM-U950P - B/W Dot-matrix Printer Specification page 5

REV. SHEET
ùOptional Magnetic lnk Character Recognition (MICR) reader ..
B General
Descriptio
n
6 Section 1.8, Paper - 4)
c) Check paper (only when the printer is used with the MICR reader)
6-1 Section 1.8, Paper - 7) Notes on using the MICR reader
Personal check width: 70mm ® 68mm
9
11 Section 1.12, Electrical Characteristics - 1)
Ripple voltage: 300 mVpp or less (only when the printer is used with
the MICR reader.
Section 1.12 -2), b) Printing
Operating MICR reader: Mean -approximately 2.3A
Section 1.13, Certifications
1) EMI standards
2) Safety standards
Section 1.14, Electrostatic Protection
Section numbers are shifted hereafter.
12 2) MICR reader mechanism
12-1 Section 1.16, MICR Reader
23 Description for fundamental calculation pitch is shifted to sheet 23-1.
23-1 MICR command lists (
24 Section 3.2.1, Character Code Tables - page 0
(Note) The BS and FS codes are available only when the printer is
36 Title of Figure 3.4.1, Blinking Pattern in Slip Mode (slip insertion
waiting state) is added.
Figure 3.4.1, Blinking Pattern in Slip Mode (slip removal waiting state)
Figure 3.4.3, Blinking Pattern in MICR Mode
36-1
Section 3.5, Self-test - 1)
37
ùMICR reader circuit function
Section 3.14, Reading MICR Characters and Printing Endorsements
44-1
44-2 Section 3.15, Cleaning the MICR Mechanism
46 Section 5.1, Standard Accessories
Slip caution label
TITLE
REVISION SHEET
CHANGED CONTENTS
®
DLE EOT BS, FS a 0, FS a 1, FS a 2, FS b, FS c
used with the MICR reader.
TM-U950/U950P
Specification
(STANDARD)
1.13, EMI and Safety Standards Applied
1) Europe
2) North America
3) Japan
(Section 1.15®1.14, 1.16®1.15)
Sheet 4 of 10
DATE
[Addition]
[Addition]
[Addition]
[Correction]
[Addition]
[Addition]
[Change]
[Deleted]
[Addition]
[Addition]
)
[Addition]
[Addition]
[Addition]
[Addition]
[Addition]
[Addition]
[Addition]
[Addition]