Epson TM-U950P - B/W Dot-matrix Printer Specification page 27

Printing U.S.A personal checks (lengthwise printing)
1) Width:
2) Thickness:
3) Lengthwise printing (on the back)
Printing within the printable area shown in Figure 2.9.4 is possible, but pay attention to the
following points:
À Since only one roller is used, paper fed per step is calculated as 0.1764mm (.00069").
Distance from the top of the slip to the printing position is 8.0 mm (0.31" = A) (calculated value.)
Á The printable area is 180 dots (360 positions) from the right-side print starting position.
 To print endorsements on the back in the specified area (within 1.5 inches from the top), set
the print position for the last line so that it is printed at 3 mm above the bottom of the printable
area.
EPSON
68 to 77 mm (2.68 to 3.03")
0.09 to 0.2 mm (.0035 to .0079")
Figure 1.9.3 U.S.A. Personal Check Printable Area
TITLE
TM-U950/U950P
Specification
(STANDARD)
(All the numeric values are typical.)
SHEET NO.
REVISION
NEXT
C
A
11 10
SHEET
10 9