Thin Wall Installation
(Fiberglass, Acrylic): Remove
the plaster guard from the
backing plate.
Twist the plaster guard dome to
separate it from the outer ring.
Discard the outer ring.
Slide the dome over the valve
stem.
Provide a 4" (10.2cm) diameter
hole in the finished wall material.
Make openings for the stops (if
included) by using the holes in
the backing plate as a guide.
Secure the backing plate to the
back of the wall material.
Do not remove the dome until
instructed.
Kohler Co., Kohler, WI
Backing
Plate
Valve Stem
Dome
Wall
Backing Plate
Material
UP
HOT
2 3/4" (7cm)
Rough In Depth
114552 2
7
Plaster
Guard
Outer
Ring
4"
(10.2cm) D.
Plaster
Guard
CE