Kohler 11829T-B Installation Instructions

INSTALLATION INSTRUCTIONS
11829T-B
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co. reserves
the right to make changes in product characteristics, packaging, or availability at any time without notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Shut off the water supplies to the fitting.
2. Inspect the supply tubing for damage. Replace as necessary.
3. Observe local plumbing codes.
4. Recommended minimum working pressures is 0.2~0.5MPa(2~5bar).
5. This faucet must work with a valve system (purchased separately) which has both on/off and hot/cold controls.
6. The highest working pressure for showerhead is 0.5MPa(5bar). If it exceeds 0.5MPa(5bar), a pressure reducer
is needed. The highest water and environment temperature is 60°C. Please keep handspray, showerhead and the
shower arm away from heater, or it may become damaged and cause injury to the user.
HANDLE OPERATION
Turn the diverter handle counter-clockwise, the back connector of the diverter works; turn it clockwise, showerhead
works.
ROUGH-IN DIMENSIONS
(68~79)
332
Wall
34
G1/2˝
G1/2˝
1240256-2A-A
Shower Column
422
Ø182
G1/2˝
G1/2˝
Floor
1