Feed Dog Height - Kenmore 385.16231400 Service Manual

SEWING MACHINE DIV.20 MODEL 385. 16231400
MECHANICAL ADJUSTMENT
FEED DOG HEIGHT
TO CHECK:
1. SET THE STITCH LENGTH CONTROL AT "4", AND RAISETHE NEEDLE TO ITS HIGHEST
POSITION.
2. RAISE THE PRESSER FOOT, AND PLACE THE FEED DOG HEIGHT GAUGE (#68496)
ON THE NEEDLE PLATE.
3. TURN THE HANDWHEEL, AND CHECK THE FEED DOG HEIGHT.
4. THE FEED DOG HEIGHT SHOULD BE IN ACCORDANCE WITH CHART 1.
CHART 1
GAUGE FEED DOG HEIGHT
FACE (A) FACE (B)
0.95MM 0.75MM
NOT MOVING MOVING CORRECT
NOT MOVING NOT MOVING LOW
MOVING MOVING HIGH
STRETCH LENGTH
• 0_1 2 3 4
_ m m
STITCH LENGTH CONTROL
/
2O