Front Cover - Kenmore 385.16231400 Service Manual

SEWING MACHINE DIV.20 MODEL 385. 16231300
SERVICE ACCESS
FRONT COVER
(c)
%
(oJ .-."
_- "
,,
(B)
<_ (H)
(o)
1. OPEN THE FACE COVER.
2. REMOVE THE TOP COVER (SEE P.6), AND THE BELT COVER (SEE P.8).
3. REMOVE SETSCREWS (A) AND (B).
4. LOOSEN SETSCREWS (C) AND (D), THEN REMOVE THE FRONT COVER (E).
5. UNHOOK THE FRONT COVER FROM THE LATCH (F) OF THE REAR COVER.
6. TAKE OFF THE LEFT BoTroM END OF THE FRONT COVER (G).
7. DISCONNECT THE CONNECTORS FOR PRINT BOARD F AND SLIDE VOLUME (H).
NOTE: TO DISCONNECT THE CONNECTORS, REMOVE THE CIRCUIT BOARD COVER
(REFER TO PAGE 39).
TO REPLACE, FOLLOW THIS PROCEDURE IN REVERSE.
9