Prepare Your; Setting Spool; Adjust The Presser Foot; Thread Cutter - Kenmore Sears 385.1158180 Owner's Manual

SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Setting Spoot Pin = Adjust the Presser Foot Lever = Thread Cutter
The spool pin is used for holding the spool
of thread m order to feed thread to the
machine.
To use, purl up the spool pro. Push down
for storage.
Normal up
posJlJon
High pos_t_or
posllton
P
position
........... J
The Presser Foot Lever raises and lowers your
presser foot.
You can raise it about 1/4" higher than the normal
up position for easy removal of the presser foot or
to help you place heavy fabrics under the presser
foot.
You don't need a pmr of smssors to cut the
thread after you finish sewing. Just use the
handy thread cutter.
Puif the threads to _engthen several inches
before starting the next seam.