Oil Behind; Arm Cover Plate; Oil The Underside - Kenmore Sears 385.1158180 Owner's Manual

SECTION 5. CARE FOR YOUR MACHINE
Oiling the Machine
Oi] the machine m all areas shown on this page at least once a year; otherwise the machine can become sluggish or will knock Ioud]y_ If you use the machine
frequently, oi] the machine under the top cover about every three months, In case machine Is not used for an extended time, oil it before sewing. Use good quality
sewing machine oil. One or two drops of oil is suffiment. Remove excess oil, otherwise it may stain fabric.
Kenmore sewing machine oil is available at your nearest Sears retail store.
NOTE: Unp]ug the machine before oiling. Remove needle and put needle bar in full down position.
• Oil behind the Face Cover Plate and under the Arm Cover Plate
e Oil the Underside
Face cover plate
/Armcover
!
plate
Shuttle cover
Open face cover plate andlor remove arm cover plate by loosening up top screw to oil points
in illustration.
Use only a drop of oil; do not over-oil.
Open the shuttle cover by pulling down the embossed part on
the left s_de of the cover. Tilt the machine head back and
remove bottom cover. Oi] points m illustration.
3O