Prepare Your; Set Up The Machine; Plug In The Machine And Switch On The Power; Foot Control - Kenmore 3851278191 Owner's Manual

SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Set Up the Machine
• Plug in the Machine and Switch on the Power
Power
switch
\
Power supply plug
supply
Plug
connectol
Machine
plug
light
4. Push the light and power switch to turn
on the power and sewing light.
NOTE: Before inserting the plug into your
machine, be sure the power switch is
OFF.
t; ,Ct_,,ek your outer _besufeit is a tlOto 120 €_hffdreni
Volt AC outlet,
2. Insert the machine plug into the three-prong
plug connector, as shown. It will only fit one
way.
SAFETY FEATURE:
Your machine will not operate unless the
light/power switch is turned on. If you are
interrupted or stop sewing, turn off the
light/power switch to prevent injury to
3. Insert the power supply plug into the outlet.
• Foot Control Use
Foot control
The foot control regulates the speed at
which you sew.
To increase speed, gently press down with
the ball of your foot.
To decrease speed, release your foot pres-
su re slightly.
NOTE: The foot control is sensitive and
w41| _ or _ your
sewing speed imrfiediately.
Practice on a scrap of fabric to
regulate your sewing speed to
your taste and needs.