Sew In A Zipper - Kenmore Sears 385.1158180 Owner's Manual

SECTION 3. LEARNTHESTITCHES
Sew
in a Zipper
Fabric Preparation:
Put the right s_des of the fabric to-
gether and sew to the end of the zip-
per opening. Use the reverse to lock
the stitches.
Sew the z_pper opening with stitch
selector at " t ,,
l and top thread
tension at "3"
of tabrlc
Top edge ol _abrlc
Set the Machine
Stitch Stitch selector
If,',
Top thread tension
control 3 to 6
Zipper foot
Zipper teeth
Zipper tape
To Sew:
1. Fold back the _eft seam allowance
as shown.
2. Turn under the right seam allow-
ance to form a 1/8" fold,
3. P{ace the zipper teeth next to the
t/8" fold and pin in place,
4. To sew the left side of the zipper,
set the zipper foot on the left side
of the needle.
5, Lower the z=pper foot on the right
side at the bottom of the z_pper
so that the need]e p_erces the fold
and the z=pper tape,
6, Sew through the fold and the zip-
per tape to the point where the
slider begins.
7, Lower the needle to hold the fab-
ric and raise the presser foot,
23