Kenmore Sears 385.1158180 Owner's Manual page 13

SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Pick Up Your Bobbin Thread
!
Raise presser foot iever. Ho|d top
thread loosely in left hand and rotate
handwheeL toward you one comptete
turn.
2_
Bring bobbin thread up by pulling
top thread,
3. Pull both threads under and to the
back of the presser foot, leaving 4
to 6 inches of thread clear.
If you cannot pick up bobbin thread by following steps gtven above, then check:
1. Is needle threaded from front to back?
2, ls thread tangled around needle?
3. Are 3 to 4 inches of thread coming from the shuttle?
4. Is thread from shuttle tangled?
5. Is bobbin properly Lnstalled in the bobbin case?
6. ls the machine threaded according to the instructions?
11