Before starting
1. Run water at faucet until it is hot. Turn water off.
,2. Pull hoses out of their storage compartment on the back
of the dishwasher I_1.
NOTE: Make sure the hoses are not kinked or twisted.
Kinked hoses reduce washing performance.
S
3. Pull down on the locking collar while lifting the hose
connector onto the faucet adapter [].
4. When the connector snaps into place, release the
locking collar.
5. Turn the hot water on slowly until it is all the way on.
6. Plug in power supply cord.
Faucet adapter
collar