Data Management - DeLorme Earthmate PN-60 GPS User Manual

The default order for layering data is:
• GIS layers by name (XMap only)
• Draw Layers
• Public Lands
• User Raster Data (XMap only)
• Custom Raster Data (XMap only)
• ImageReg (XMap only)
• DigitalGlobe 30cm (DG 30cm)
®
• High-resolution City Imagery (Hi-Res Cities)
• DigitalGlobe 60cm (DG 60cm)
• DigitalGlobe 1m (DG 1m)
• Color Aerial Imagery (Color DOQQ)
• Aerial Imagery (DOQQ)
• USGS Quads (3DTQ)
• Canadian 1:50K Topographic Sheets (Canadian 1:50K)
• NOAA Nautical Charts (NOAA Charts)
• Satellite Imagery (SAT10)
• XMap Topographic Data (XMap only)
• DeLorme Topographic Data
• DeLorme World Base Map 7
To layer data
Use the Data Layering option to select the types of data you want to view on your PN-60 and the order in which you
want data to display. From the Map Page, go to MENU > Map Setup > Data Layering to view a list of all the types of
data you have stored on your device's internal memory or on an SD card in the device; this may include data that is not
available for the area you are viewing. When you highlight an item, the full name of the data type shows in the box at
the bottom of the screen.
To
Show a type of data
Hide a type of data
Select/clear all check boxes
Change the order in which
data is layered
Reset default layer settings
View layer details

Data Management

The PN-60 stores routes and the base map in its internal memory. You can save user maps—including the detailed
DeLorme Topo North America maps, waypoints, geocaches, and tracks in the device's internal memory or on a
removable SD card.
To view and manage memory information, go to Settings > System > Memory Use.
Do this
Select the check box next to it
Clear the check box next to it.
Go to MENU > Select All or Deselect All
Highlight the item you want to move, then use the arrows on the right side of the
screen to move the item up or down in the list.
If two data types have identical zoom level settings, the one higher in the list has
precedence.
Go to MENU > Restore Layer Defaults
Highlight layer and go to MENU > Layer Detail
Earthmate PN-60 User Manual | Map Page 13