Table of Contents
Advertisement
To activate the no-wake mode:
TIP:
The no-wake mode cannot be activated im-
mediately after starting the engine. After start-
ing the engine, wait for 5 seconds or more
before activating the mode.
(1) Release the throttle lever.
(2) Check that the shift lever is in the forward
position.
1 Shift lever
2 Forward position
TIP:
The no-wake mode cannot be activated when
the shift lever is in the reverse position.
(3) Push and hold the "NO-WAKE MODE"
switch. When the no-wake mode is acti-
vated, the beeper sounds three times
quickly and "5" (when miles are selected)
or "8" (when kilometers are selected)
starts flashing in the digital speedometer
display. Keep the throttle lever in the idle
position when the no-wake mode is acti-
vated.
1
2
Features and functions
TIP:
The digital speedometer display flashes con-
tinually while the no-wake mode is activated.
1
1 "NO-WAKE MODE" switch
To deactivate the no-wake mode:
Perform one of the following procedures. The
beeper sounds two times quickly and the dig-
ital speedometer display stops flashing when
the no-wake mode is deactivated.
Push the "NO-WAKE MODE" switch.
G
Squeeze the throttle lever.
G
TIP:
The no-wake mode is also deactivated when
the engine is stopped.
EJU37022
Cruise assist
The cruise assist is a function for maintaining
a desired engine speed within a fixed range
while operating the watercraft.
42
Advertisement
Table of Contents
