Table of Contents
Advertisement
"RPM" indicator light comes on when the an-
alog tachometer is selected.
1 "Speed/RPM" button
2 "SPEED" indicator light
3 "RPM" indicator light
The "SPEED" indicator light blinks three
times, then comes on, if miles are selected as
the display units when the analog speedome-
ter/tachometer is switched to the speedome-
ter function.
Analog speedometer
The analog speedometer shows the water-
craft speed against water.
The large inner numbers on the meter show
the watercraft speed in miles per hour (mph)
and the small outer numbers show the speed
in kilometers per hour (km/h) when the speed-
ometer function is selected.
Analog tachometer
The analog tachometer shows the engine
speed.
The large inner numbers on the meter show
the engine speed (× 100 r/min) when the ta-
chometer function is selected.
Features and functions
EJU36800
"SPEED" indicator light
The "SPEED" indicator light comes on when
the analog speedometer is selected.
1 "SPEED" indicator light
The "SPEED" indicator light blinks three times
in the following instances:
The analog speedometer/tachometer is
G
switched to the speedometer function when
miles are selected as the display units.
The display units of the multifunction infor-
G
mation center are switched to miles from ki-
lometers.
Miles are selected as the display units when
G
the multifunction information center starts
operating.
EJU34960
"RPM" indicator light
The "RPM" indicator light comes on when the
analog tachometer is selected.
1 "RPM" indicator light
46
Advertisement
Table of Contents
