Right Handlebar Switches; Throttle Lever; Cooling Water Pilot Outlets - Yamaha FX SHO Owner's Manual

Lock mode of the Yamaha Security System
G
has been selected. (See page 40 for
Yamaha Security System lock and unlock
mode selection procedures.)
Clip is removed from the engine shut-off
G
switch.
Throttle lever is squeezed.
G
EJU36700

Right handlebar switches

1 Up switch
2 Down switch
3 "SET" switch
4 "NO-WAKE MODE" switch
EJU36710
"SET" switch
Push this switch to activate the cruise assist.
(See page 42 for more information.)
EJU36720
Up and down switches
Push these switches to increase or decrease
the engine speed while the cruise assist is op-
erating. (See page 42 for more information.)
EJU36730
"NO-WAKE MODE" switch
Push this switch to activate or deactivate the
no-wake mode. (See page 41 for more infor-
mation.)
1
2
3
4
Features and functions
EJU31210

Throttle lever

Squeeze the throttle lever to increase engine
speed.
1 Throttle lever
Release the throttle lever to decrease engine
speed or to return it to the idle position.
EJU36740

Cooling water pilot outlets

This watercraft is equipped with cooling water
pilot outlets on the port (left) and starboard
(right) sides of the watercraft.
When the engine is running, cooling water is
circulated in the engine, and then it is dis-
charged from the pilot outlets.
To check for proper operation of the cooling
system, check that water is being discharged
from the port (left) pilot outlets. If water is not
being discharged from these outlets, cooling
water may not be circulating in the engine.
When this occurs, stop the engine and check
1
34