Table of Contents
Advertisement
Features and functions
check engine warning indicator begin to blink,
and the buzzer sounds intermittently.
If this occurs, reduce the engine speed, return
to shore, and have a Yamaha dealer check
the engine.
TIP:
Press any button on the multifunction informa-
tion center to stop the buzzer.
EJU35034
Right multifunction display and operation
buttons (for FX Cruiser SHO)
The right multifunction display shows the fol-
lowing information.
Compass
G
Average speed
G
Tripmeter
G
Trip timer
G
Fuel consumption per hour
G
Fuel consumption per kilometer/mile
G
Water temperature
G
Air temperature
G
51
The following operation buttons are on the
right side of the multifunction information cen-
ter.
1 "Mode/Reset" button
2 "Start/Stop" button
To switch the display mode, push the
"Mode/Reset" button for less than 1 second.
The display mode changes in the following or-
der.
Compass → Average speed → Tripmeter →
Trip timer → Fuel consumption per hour →
Fuel consumption per kilometer/mile → Water
temperature → Air temperature
To switch the display units between kilome-
ters/liters/degrees Celsius and miles/gal-
lons/degrees
Fahrenheit,
"Volt/Hour" button for at least 1 second, within
10 seconds after the multifunction information
center starts operating.
The "SPEED" indicator light blinks three times
if miles/gallons/degrees Fahrenheit are se-
lected as the display units when the multifunc-
tion information center starts operating, or if
push
the
Advertisement
Table of Contents
