Procedure For Tilting Down (Power Trim And Tilt Models); Shallow Water; Power Trim And Tilt Models - Yamaha 115 Owner's Manual

and tilt switch "
trim rods. NOTICE: Be sure to retract
the trim rods completely during
mooring. This protects the rods from
marine growth and corrosion which
could damage the power trim and tilt
mechanism.
[ECM00251]
EMU33120
Procedure for tilting down (power
trim and tilt models)
1. Push the power trim and tilt switch "
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support lever
becomes free.
2. Release the tilt support lever.
3. Push the power trim and tilt switch "
(down) to lower the outboard motor to
the desired position.
" (down) to retract the
ZMU03452
ZMU03453
DN
"
EMU28061

Shallow water

EMU32851

Power trim and tilt models

The outboard motor can be tilted up partially
to allow operation in shallow water.
ECM00260
NOTICE
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
ting up for and cruising in shallow water.
Otherwise severe damage from overheat-
ing can result.
EMU32922
Procedure for power trim and tilt models
"
1. Place the remote control lever in neutral.
Operation
UP
DN
ZMU01936
DN
ZMU04147
51