Specifications And Requirements; Specifications - Yamaha 115 Owner's Manual

EMU31480

Specifications

TIP:
"(AL)" stated in the specification data below
represents the numerical value for the alumi-
num propeller installed.
Likewise, "(SUS)" represents the value for
stainless steel propeller installed and "(PL)"
for plastic propeller installed.
EMU2821C
Dimension:
Overall length:
808 mm (31.8 in)
Overall width:
582 mm (22.9 in)
Overall height L:
1472 mm (58.0 in)
Transom height L:
516 mm (20.3 in)
Weight (without propeller) L:
163.0 kg (359 lb)
Performance:
Full throttle operating range:
4500–5500 r/min
Maximum output:
84.6 kW@5000 r/min
(115 HP@5000 r/min)
Idling speed (in neutral):
750 ±50 r/min
Engine:
Type:
2-stroke V
Displacement:
3
1730.0 cm
Bore × stroke:
90.0 × 68.0 mm (3.54 × 2.68 in)
Ignition system:
CDI
Spark plug with resistor (NGK):
BR8HS-10

Specifications and requirements

Drive unit:
Fuel and oil:
Spark plug gap:
0.9–1.0 mm (0.035–0.039 in)
Control system:
Remote control
Starting system:
Electric
Starting carburetion system:
Choke valve
Min. cold cranking amps (CCA/SAE):
380.0 A
Min. marine cranking amps (MCA/ABYC):
502.0 A
Min. reserve capacity (RC/SAE):
124 minutes
Maximum generator output:
20.0 A
Gear positions:
Forward-neutral-reverse
Gear ratio:
2.00 (26/13)
Trim and tilt system:
Power trim and tilt
Propeller mark:
K
Recommended fuel:
Regular unleaded gasoline
Min. pump octane:
86
Recommended engine oil:
YAMALUBE 2-stroke outboard motor
oil
Lubrication:
Oil injection
Engine oil tank capacity:
0.9 L (0.95 US qt, 0.79 Imp.qt)
Remote oil tank capacity:
10.5 L (11.10 US qt, 9.24 Imp.qt)
Recommended gear oil:
Hypoid gear oil SAE#90
13