Instruments And Indicators; Digital Tachometer; Trim Meter; Hour Meter - Yamaha 115 Owner's Manual

Instruments and indicators

EMU26493

Digital tachometer

The tachometer shows the engine speed
and has the following functions.
All segments of the display will light momen-
tarily after the main switch is turned on and
will return to normal thereafter.
1
3
5
6
1. Tachometer

2. Trim meter

3. Hour meter

4. Oil level indicator
5. Overheat-alert indicator
6. Set button
7. Mode button
TIP:
The water separator and engine trouble-alert
indicators only operate when the engine is
equipped with the appropriate functions.
EMU26621
Trim meter
This meter shows the trim angle of your out-
board motor.
Memorize the trim angles that work best
●
for your boat under different conditions.
Adjust the trim angle to the desired using
the power trim and tilt switch.
If the trim angle of your motor exceeds the
●
trim operating range, the top segment on
the trim meter display will blink.
26
EMU26651
2
Hour meter
This meter shows the number of hours the
engine has been run. It can be set to show
the total number of hours or the number of
4
hours for the current trip. The display can
7
ZMU01891
also be turned on and off.
To change the display format, press the
"
total hours or trip hours, or turn off.
To reset the trip hours, simultaneously press
the "
more than 1 second while the trip hours are
displayed. This resets the trip counter to 0
(zero).
The total number of hours the engine has
been run cannot be reset.
EMU26551

Oil level indicator (digital type)

This indicator shows the engine oil level. If
the oil level falls below the lower limit, the
" (mode) button. The display can show
" (set) and "
ZMU01869
ZMU01870
" (mode) buttons for