Flushing Device - Yamaha 115 Owner's Manual

cable is operating correctly before rein-
stalling the top cowling.
When the release lever is operated,
●
both the front and rear cowling hooks
should be released at the same time. If
not, adjust the rear clamp cable adjust-
ers.
Make sure the cable operates smoothly
●
and is free of corrosion.
Check that the cable is properly se-
●
cured in the holder.
When reinstalling the cowling, ensure
●
that both the front and rear locks have
operated properly. If the cowling has
not been locked properly, some parts
may be damaged by the top cowling
shaking during operation.
EMU26460

Flushing device

This device is used to clean the cooling wa-
ter passages of the motor using a garden
hose and tap water.
TIP:
For details on usage, see page 55.
1. Flushing device
1
ZMU04139
Components
25