Vodavi Triad Station User Manual page 75

60
To use Intercom Transfer with DSS Buttons:
1. Receive or make an intercom call using a DSS button.
2. Press the TRANS button. An intercom dial tone will sound.
3. Press the DSS button where to transfer the call.
4. Hang up (stations 1 and 2 will be connected).
Intercom Calls
To place an Intercom Call:
1. Press the DSS button of the party to be called (if
programmed at your phone),
-or-
Dial the extension number.
(You will hear ringing if the called station is in the T mode;
or three bursts of tone if called station is in H or P mode.)
2. Lift the handset or use the speakerphone after the tone
bursts stop.
3. Hang up to end the call.
To answer an Intercom Call:
In the T mode (LED On), you will hear repeated bursts of
intercom tone ringing and the HOLD button slow flashes.
Lift the handset or press the ON/OFF button to answer,
-or-
Press the H-T-P button to the H mode to reply.
Dialing a number in the numbering plan activates
the telephone automatically.
Intercom