Table of Contents
Advertisement
82
Redial a Saved Number
1. Press the SPEED button.
2. Press the [
Repeat Redial
When you place a CO call and a Busy or No Answer is
received:
1. Press the preprogrammed RPT REDIAL flexible button [643].
You wil receive an LCD prompt for a timer value.
2. Enter a valid number (006-999 seconds) for the Repeat
Redial Timer. The default value is 060 (one minute). A
confirmation tone will sound when you go on-hook. The
flexible button LED will steady.
When the timer expires, you will receive a signal via a CO
line queue indication on the RPT REDIAL flexible button.
During the Queue Call Back, the LCD display will indicate
that this is a Redial Call Back. Once the line queue is
answered, the LCD will indicate an outgoing CO line.
To activate a redial:
Press the preprogrammed REDIAL flexible button,
-or-
Press the ON/OFF button,
-or-
Lift the handset, the line will be seized and number is
dialed. If you receive a busy/no answer, you may repeat the
step to activate another redial.
] key. The saved number is automatically dialed.
.
❑
Flex
Btn
EN TER R P T RE DI A L TI M E R :
X X X
006 -9 99
Redial
Advertisement
Table of Contents
