Table of Contents
Advertisement
Volume Control
SINGLE LINE TELEPHONE
The volume control on the Single Line Telephone is located
on the right side of the telephone. The slider switch options
are HI for loud volume, LO for low volume, and OFF to turn
the ringer off. Two-line models have a volume switch for each
line. Certain models do not have an OFF option.
Speakerphone models have a sliding volume switch to adjust
speakerphone volume. Slide the switch toward you for lower
volume or away from you for increased speakerphone
volume.
Each model has a volume button that can be pressed to
increase or decrease the handset volume.
The B/Z ringer switch is located on the bottom of the
telephone near the line jacks. This switch should be set to the
Z mode for business/hospitality applications and to the B
mode for residential applications.
The MSG light and the Line In Use (LIU) LEDs will not
operate when set in the B ringer mode.
For single line telephones that are not equipped with a
volume control slider switch or to increase the volume
greater than that allowed by the slider switch, use the
following steps.
1. Dial [638].
2. Dial a valid number (0-9) to select a volume level.
3. Press HOLD.
97
Advertisement
Table of Contents
