Plus Mach I and II/III/IV Digital Telephone Systems (Feature Package 3) Single Line Telephone User Guide Issue 3.1 - September 2000 P/N: IN8053-00...
Page 3
Issue Release Date 12-98 8-99 5-00 9-00 LIFE SUPPORT APPLICATIONS POLICY VODAVI Technology, Inc. products are not authorized for and should not be used within Life Support applications. Life Support systems are equipment intended to support or sustain life and whose failure to perform when properly used in accordance with instructions provided can be reasonably expected to result in significant personal injury or death.
[ before automatically returning to the call. Call Back If you dial a telephone that is busy and want to leave a Call Back indication: 1. Briefly depress and release the hookswitch. 2. Dial [622] and replace the handset.
Call Forwarding All Calls 1. Lift the handset. 2. Dial [640 + 6]. 3. Dial station number where calls are to be forwarded. 4. Replace the handset. Busy/No Answer 1. Lift the handset. 2. Dial [640]. 3. Dial the desired call forward code: [7] = No Answer calls [8] = Busy calls [9] = Busy/No Answer calls...
Call Park Remove Call Forward, DND, & Personalized Msgs A convenient code has been incorporated to cancel either Call Forwarding, Do Not Disturb, or Personalized Messages when the SLT user has forgotten which mode is active on the phone. 1. Lift the handset. A notification tone is heard. 2.
To Retrieve a Station Parked Call: 1. Lift the handset. 2. Dial [# + 6] and the user’s station number (while at the user’s telephone or from any telephone in the system.) -or- 3. Dial [438] from the user’s station.
Directed Call Pickup Upon hearing an unattended telephone ringing: 1. Lift the handset. 2. Dial [#1]. 3. Dial station number of ringing telephone. Group Call Pickup Upon hearing an unattended telephone ringing: 1. Lift the handset. 2. Dial [#0]. You will be connected to incoming intercom or outside line call.
2. Dial [660]. A Flash command is presented to the PBX or Centrex CO Line and a stutter tone is heard. 3. Dial desired telephone number. 4. Replace handset to complete transfer. Calling Station Tone Mode Allows a calling station to override a called key station’s “H”...
CO Line Queuing Receiving a Camp-On When a Camp-On warning tone is received through the handset while you are on a CO call, you can: Hang up the present call, take the new call, or ignore the Camp-On signal. Also refer to the feature.
Conference w/Personal Park While connected to an outside line: 1. Depress hookswitch momentarily. An intercom dial tone is heard. 2. Dial [438]. (The first call is placed in Personal Park). 3. Dial desired number for second call. 4. Depress hookswitch momentarily. An intercom dial tone is heard.
(4) seconds to automatically be queued onto LCR for an available line. LCR Queue Call Back If an LCR Queue Call Back has been activated: 1. When telephone is signaled, answer the call. (The designated phone number will automatically be redialed.) 2. Wait for answer.
2. Request that party meet you on the page. 3. Do not hang up; wait for the requested party to answer. Answering a Meet Me Page Go to the nearest telephone: Dial [770]. You will be connected to the party that paged you.
Name in Display Programming Name in Display Programming Every SLT extension has the capability to program the user’s name so that people using display telephones will see the name instead of the station number. 1. Lift the handset. 2. Dial [690]. 3.
Off-Hook Preference If your phone is programmed for Off-Hook Preference, you will hear outside line dial tone when lifting the handset. When this operation is desired, you may not have access to all features contained in this User Guide. However, consult your Centrex or PBX User Guide for additional features you may have.
Personalized Messages Each station can select a pre-assigned message to be displayed on the LCD of any Key Telephone calling that station. To select one of the ten available messages: 1. Dial [633]. 2. Dial the two-digit code for the message to display.
2. Dial Line Group access code. 9 = LCR Line Group 1 800 = when E911 enabled 801 to 807 = Line Groups 3. Dial telephone number. Speed Dial 1. Lift the handset. 2. Dial [668]. 3. Dial the desired speed number bin:...
CO Lines in Line Group 1 will be used for SLT Speed Dial. 1. Lift the handset. 2. Dial [661]. 3. Dial desired speed number bin (000-019). 4. Dial telephone number you wish to store. 5. Briefly depress and release the hookswitch. A confirmation tone is heard. Universal Day/Night Answer...
User Worksheets SLT Default Numbering Plan Feature Account Code, Enter ACD* Agent Help Agent Login (Primary Grp) Agent Login (Secondary Grp) Agent Logout (Primary Grp) Agent Logout (Secondary Grp) 581+[5UU] Line Queue ACD* Available /Unavailable Group Member Status ACD* Group Pilot Numbers Overflow Avail /Unavail Attendant Call Back...