Supported Command Sets; Ata General Feature Command Set; Power Management Command Set - Intel Solid-State Drive 320 Series Product Specification

5.0

Supported Command Sets

The Intel SSD 320 Series supports all the mandatory ATA (Advanced Technology
Attachment) commands defined in the ATA8-ACS specification described in this section.
5.1

ATA General Feature Command Set

The Intel SSD 320 Series supports the ATA General Feature command set (non-
PACKET), which consists of:
• EXECUTE DEVICE DIAGNOSTIC
• FLUSH CACHE
• IDENTIFY DEVICE
Note:
• READ DMA
• READ SECTOR(S)
• READ VERIFY SECTOR(S)
• SEEK
• SET FEATURES
• WRITE DMA
• WRITE SECTOR(S)
• READ MULTIPLE
• SET MULTIPLE MODE
• WRITE MULTIPLE
The Intel SSD 320 Series also supports the following optional commands:
• READ BUFFFER
• WRITE BUFFER
• NOP
• DOWNLOAD MICROCODE
5.2

Power Management Command Set

The Intel SSD 320 Series supports the Power Management command set, which
consists of:
• CHECK POWER MODE
• IDLE
• IDLE IMMEDIATE
• SLEEP
• STANDBY
• STANDBY IMMEDIATE
®
Intel Solid-State Drive 320 Series
Product Specification
16
See Appendix A, "IDENTIFY DEVICE Command Data" on page 26
returned after issuing an IDENTIFY DEVICE command.
® ®
Intel Intel Solid-State Drive 320 Series Solid-State Drive 320 Series
for details on the sector data
September 2011
Order Number: 325152-002US