2. Click Add to add a new entry in the BOOTP IP table.
v IP Address: The specified address used by the BOOTP protocol. This IP
address must be within the address pool in the DHCP server.
v MAC Address: The MAC address of the client device used for that IP
v Remark: The descriptions of the IP address
3. Click Apply. A new entry is added to the BOOTP IP table.
Note: The configuration changes made through the Web-based setup utility
are automatically saved into the flash memory within 30 seconds
after clicking Apply.
With DMZ, you can expose a specific computer to the Internet for special
applications and faster Internet gaming.
Click Advanced Configuration
DMZ Configuration to display the DMZ
Part 5: Using tools for advanced configuration