IBM 22P6415 User Manual page 24

5. Select Obtain an IP address automatically.
6. Click the DNS tab.
7. Select Disable DNS.
8. Save the changes, and then restart your computer. Your computer will be
able to access the Internet through the Gateway.
Note: If you do not want to use DHCP service, you must manually configure
the IP address of your computer. To manually configure the IP address
of your computer, do the following on the TCP/IP Properties page for
the network card connected to the Gateway:
1. Select Specifying an IP Address.
2. Type the IP address for your computer.
3. Type the subnet mask. If you choose to keep the default subnet mask
setting on your server, type
4. Click the Gateway tab.
5. Type the IP address of the server.
6. Click Add to insert the entry as the first item in the Installed Gateway
List.
7. Click the DNS tab.
8. Select Enable DNS.
®
4-2
IBM High Rate Wireless LAN Gateway: User's Guide
.